BBWDD - DITZCO ALKYD ENAMEL, DQE81643
- MSDS: BBWDD
- Manufacturer: PPG INDUSTRIES
- Product Name: DITZCO ALKYD ENAMEL, DQE81643
- National Stock Number: 8010-00F006637
Product Identification
Product ID:DITZCO ALKYD ENAMEL, DQE81643
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006637
MSDS Number: BBWDD
Responsible Party
Emergency Phone: (304) 843-1300
Cage: EO498
Contractor
Telephone: 412-492-5555
Cage: EO498
Ingredients
MINERAL SPIRITS-RULE 66
Fraction By Weight: <.5%
PROPYLENE GLYCOL METHYL ETHER ACETATE
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: <5%
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 25%
OSHA PEL 100 PPM
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 15%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
CAS: 7758-97-6
RTECS: GB2975000
Fraction By Weight: 20%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.05MG/M3(CR)A2;8990
Hazards
Effects of Overexposure:SKIN, EYE & RESP TRACT IRRIT/CNS
DEPRESSION/HEADACHE/DIZZINESS/STAGGERING GAIT/CONFUSION OR COMA.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. NOTIFY
PHYSICIAN. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. TAKE TO
PHYSICIAN FOR DEFINITIVE MEDICAL TREATMENT. SKIN: WASH WITH WATER.
REMOVE CONTAMINATED CLOTHING. CONSULT PHYSICIAN.
Fire Fighting
Flash Point:88F PMCC
Lower Limits:1.1%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION OR EXPLOSION.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCE OF IGNITION (FLAMES, HOT
SURFACES & ELECTRICAL, STATIC OR FRICTION SPARKS). AVOID BREATHING
VAPORS. VENTILATE AREAS. REMOVE WITH INERT ABSBENT & NON-SPARKING
TOOLS.
Handling
Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
NFPCLASS IC FLAMMABLE LIQUIDS. DON'T TAKE INTERNALLY.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING CONTENTS CAN BE HARMFUL OR FATAL. DON'T FLAME CUT, BRAZE
OR WELDITHOUT NIOSH APPROVED RESPIRATORS OR APPROPRIATE
VENTILATION.
Exposure Controls
Respiratory Protection:OPEN AREAS: FILTER RESPIRATORS FOR OVERSPRAY.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
MSDS DATE: 07/27/84. WT/GAL: 9.89. _
Chemical Properties
Boiling Pt:B.P. Text:110-199C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58.7
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO & LEAD OXIDE, OXIDES OF CHROMIUM.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE &
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.